ts3200 password recovery

For customers that are running a firmware level below 1.90 and have not changed the default Admin password,  it will be lost when they  upgrade the library firmware to 1.90 or later. At this time, the customer can log  in the Admin account with a password of "adm001" and then change the password to something else.   Alternatively, the customer can select from the operator panel where  the password will be reset to "secure". 

http://www-01.ibm.com/support/docview.wss?uid=ssg1S1003110

TSM Supported Operating Systems

Overview - Tivoli Storage Manager Supported Operating Systems

Hardware and Software Requirements: Version 7.1.3 Data Protection for Oracle

Hardware and Software Requirements: Data Protection for VMware Version 7.1.3

How to Reset the BladeCenter Management Module

http://www.redbooks.ibm.com/abstracts/tips0519.html?Open

Use a straightened paper clip or similar item to access it. The reset button has two uses:

• Reset the network configuration: Press and hold the reset button for 3 seconds or less.
• Reset the entire management module (including user IDs and passwords) to the factory defaults. This requires a sequence of presses and releases:
  1. Press and hold the reset button for 5 seconds.
  2. Release the button and wait 5 seconds.
  3. Press and hold the button for another 10 seconds.
  Note that this sequence should be as precise as possible to ensure success: 5 in, 5 out, 10 in. After you do a full factory defaults reset in this way, the default user ID and password will be in effect: USERID (all caps) and PASSW0RD (a zero, not the letter O).

After the network configuration has been reset, you can access the Web interface to reconfigure it. To do this, you will need to know the management module's IP address. This can be done as follows:

• The management module defaults to using DHCP. The host name will be MMxxxxxxx, where xxxxxxx is the MAC address of the management module. This number is printed below the reset button.
• If no DHCP server is found, the management module uses a default IP address of 192.168.70.125 with subnet mask 255.255.255.0. The host name will be MMxxxxxxx.

Note: Because it is possible to reset the passwords using the reset button, you should ensure that your BladeCenter chassis is physically secure so that only authorized personnel can physically access the reset button.

Storwize SDD PCM/DSM

Support Matrix for Subsystem Device Driver, Subsystem Device Driver Path Control Module, and Subsystem Device Driver Device Specific Module



Multipath support for hosts running the Linux operating system
http://www-01.ibm.com/support/knowledgecenter/ST3FR7/com.ibm.storwize.v7000.641.doc/svc_linmultipathovr_21bb33.html 

// SUSE Linux Enterprise Server version 10 and later and Red Hat Enterprise Linux 5 and later only support native mulitpathing that is provided by the operating system.

В закладки: Running HMC V7 R3.3.0 in VMWare

Running HMC V7 R3.3.0 in VMWare

LTO Gen. 5 Bad Tape

С одной стороны читается без вопросов, с другой стороны скороcть эпохи 1,44", пичалько, Media, цука, Attention.

История мейнфреймов: от Harvard Mark I до System z10 EC

История мейнфреймов: от Harvard Mark I до System z10 EC

Посвящение нуба в секту =)

IBM Pre-Sales Advisor

На фоне старших X-машин с интелями P-series не очень то и дорого стоят.

IBM Pre-Sales Advisor

IBM TS3200: Unable to pull cartridge out of slot - cartridge blocked Code: 8A 4D

Unable to pull cartridge out of slot - cartridge blocked
Code: 8A 4D


1. Проверить статус магнитофонов.
2. Проверить ПО на предмет зависших заданий.
3. Проверить магазины и ленты.
4. Выполнить move для сбойнувшей ленты вручную.
5. Перезагрузить библиотеку с отключением питания.
6. Для SCSI перезагрузить app сервер.
7. Call IBM



ЗЫ
попутно: "mechanical block is the main feature of ts3200"   :-)